APEKS XTX 200 + XTX 50 2 Regulators Set
£1,022.00 GBP
Type:
SCUBA DIVING REGULATOR
APEKS XTX 200
First Stage: FSR style first stage. Highly polished bright chrome plating. Compact one piece body. 4 angled medium pressure ports, 4 x 3/8” UNF. 2 angled high pressure ports, 2 x 7/16” UNF. Optional 5th port. Removable ARCAP valve seat. Unique over-balanced, diaphragm design - as the diver descends, the over-balancing feature allows the medium pressure gas in the hose to increase at a rate faster than ambient. This results in superior performance at depth. An environmental dry system keeps water out of the main spring chamber thus preventing ice buildup and keeping silt and contamination out.
Second Stage Pneumatically-balanced second stage results in smooth, easy breathing. The XTX purge buttons are large and easy to operate. A 2-stage progressive purge is used - press the purge on the side for a lower flow rate, useful where more control is required such as filling lift bags etc, then press in the centre for the full effect of the purge, i.e. when regulator clearing etc. The large venturi lever has a soft touch rubber grip, which makes it easier to locate and use. The lever reduces the amount of grit ingress and therefore resists any possible friction giving a smooth operation. Easy-to-grip opening effort control knob keeps the diver in control. The second stage is manufactured with active protection against infection as all molded parts are produced with an additive that kills MRSA, protects against E-Coli, bacteria and fungi, and is also very effective against viruses, mould, yeast and algae. A silicone exhaust valve improves the breathing performance of the regulator. The Comfo-bite™ mouthpiece virtually eliminates jaw-fatigue. A heat exchanger (patented) which surrounds the valve mechanism, dissipates the cold caused by gas expansion while drawing in the warmth of the ambient water.
TECHNICAL SPECS
First stage:
-membrane
-brushed chrome finish
- 4 outlets 3/8" UNF MP
- 2 outlets 7/16" UNF HP
- all Mp outlets allow the regulator to be configured from right to left-handed
- apeks dry chamber system
- intermediate pressure overpressure effect
Second Stage:
- pneumatically balanced
- transformable from right to left
- easily removable exhaust conveyor
- heat exchanger
- notch adjustment of venturi effect
- sensitivity adjustment
-membrane
-brushed chrome finish
- 4 outlets 3/8" UNF MP
- 2 outlets 7/16" UNF HP
- all Mp outlets allow the regulator to be configured from right to left-handed
- apeks dry chamber system
- intermediate pressure overpressure effect
Second Stage:
- pneumatically balanced
- transformable from right to left
- easily removable exhaust conveyor
- heat exchanger
- notch adjustment of venturi effect
- sensitivity adjustment
Weight: DIN 1142 g.
APEKS XTX 50
First Stage: Uses the DST first stage Unique over-balanced, diaphragm design - as the diver descends, the over-balancing feature allows the medium pressure gas in the hose to increase at a rate faster than ambient. This results in superior performance at depth. 2 HP ports and 4 MP ports on a rotating turret are angled for optimum hose routing. An environmental dry system keeps water out of the main spring chamber thus preventing ice buildup and keeping silt and contamination out.
ADDITIONAL DETAILS
Second Stage Pneumatically-balanced second stage results in smooth, easy breathing. The XTX purge buttons are large and easy to operate. A 2-stage progressive purge is used - press the purge on the side for a lower flow rate, useful where more control is required such as filling lift bags etc, then press in the centre for the full effect of the purge, i.e. when regulator clearing etc. The large venturi lever has a soft touch rubber grip, which makes it easier to locate and use. The lever reduces the amount of grit ingress and therefore resists any possible friction giving a smooth operation. Easy-to-grip opening effort control knob keeps the diver in control. The second stage is manufactured with active protection against infection as all molded parts are produced with an additive that kills MRSA, protects against E-Coli, bacteria and fungi, and is also very effective against viruses, mould, yeast and algae. A silicone exhaust valve improves the breathing performance of the regulator. The Comfo-bite™ mouthpiece virtually eliminates jaw-fatigue. A heat exchanger (patented) which surrounds the valve mechanism, dissipates the cold caused by gas expansion while drawing in the warmth of the ambient water.
TECHNICAL SPECS
FIRST STAGE.
Diaphragm, with rotating turret
4 outlets 3/8" UNF MP
2 outlets 7/16" UNF HP
All MP outlets allow the dispenser to be configured from right to left-handed
APEKS Dry Chamber System
Intermediate Pressure Surpression Effect
SECOND STAGE.
Pneumatically balanced
Quickly transformable from right to left
Easily interchangeable exhaust conveyor (wide or compact)
Heat exchanger
Gradual venturi effect
Sensitivity adjustment
Weight: DIN 1140 g.
Diaphragm, with rotating turret
4 outlets 3/8" UNF MP
2 outlets 7/16" UNF HP
All MP outlets allow the dispenser to be configured from right to left-handed
APEKS Dry Chamber System
Intermediate Pressure Surpression Effect
SECOND STAGE.
Pneumatically balanced
Quickly transformable from right to left
Easily interchangeable exhaust conveyor (wide or compact)
Heat exchanger
Gradual venturi effect
Sensitivity adjustment
Weight: DIN 1140 g.
Pressure Gauge not included: You may be interested to add it in the cart.
FREE SHIPPING IN EUROPE